![A sweet way to make a 60 degree bend using a mitre saw which can rotate up to 45 degree angles. My brother discovered the solution by first rotating the saw at 45 degrees about the vertical, then 45 degrees about the horizontal. How lovely. [code]](http://25.media.tumblr.com/tumblr_mcf6dfree01qfg7o3o1_400.gif)
A sweet way to make a 60 degree bend using a mitre saw which can rotate up to 45 degree angles. My brother discovered the solution by first rotating the saw at 45 degrees about the vertical, then 45 degrees about the horizontal. How lovely. [code]
-
chemtaro likes this
-
peel2002 likes this
-
marcthefrog reblogged this from cnce
-
marcthefrog likes this
-
analgesics-for-virginiawoolf reblogged this from matthen and added:
:O nice
-
lsue99 likes this
-
insidethevalley likes this
-
growntodie reblogged this from ttheewwrreatth
-
ovidapparels likes this
-
tutmondigo reblogged this from cnce and added:
Perspective.
-
awtrtriziagonzales likes this
-
spencerbirch reblogged this from cnce
-
bobfry2 likes this
-
shoresite likes this
-
ani35cruz likes this
-
rea5on541 likes this
-
aleexmtz29 likes this
-
mallinearl likes this
-
fufudoodoo likes this
-
naoii likes this
-
viannanoelle reblogged this from cnce
-
viannanoelle likes this
-
sleepingwarrior28 reblogged this from cnce
-
whisperoftheshot likes this
-
the-rhythm reblogged this from cnce
-
bluntpaypuh likes this
-
mikecrometer reblogged this from cnce
-
ardhamonartandtalk likes this
-
sisi67892 reblogged this from cnce
-
sisi67892 likes this
-
asdfghjklzuk likes this
-
marty67 likes this
-
avery504 likes this
-
wishinoo likes this
-
hellokittylover4life69 likes this
-
maxoutput reblogged this from cnce and added:
#cnce I am a carpenter and that is going to come in handy. Especially under stairs.
-
maxoutput likes this
-
cosmocow likes this
-
youknowwherefindme likes this
-
achilles101 reblogged this from cnce
-
engineeringarchangel likes this
-
engineeringarchangel reblogged this from cnce
-
theanswerisntbeautiful likes this
-
ieat-rainbowss likes this
-
cnce reblogged this from matthen and added:
A sweet way to make a 60 degree bend using a mitre saw which can rotate up to 45 degree angles. My brother discovered...
-
imgenerator reblogged this from matthen
-
hyperautonomy likes this
- Show more notes